Click the plan - but where do you actually enter?
Connect a spatial plan with a list of places, entrance information and predictable selection across devices and input methods.
Article language: English

In this article
On the drawing the room is beside reception. In reality its entrance is off the other corridor. On a phone the room name disappears behind the details panel. The attendee can clearly see that the organiser invested in an interactive plan. She still does not know where to turn.
This is a hypothetical open day at a craft studio. The website helps visitors find a workshop station and read its description. It does not guide evacuation or determine a route requiring building measurements. Its job is simpler: connect a place name, an area on the drawing and practical entrance information. That relationship should survive every user gesture.
A room is not a cursor position
Start with a list of places. Each has a stable identifier, the name used on the door and a description visitors need. “Screen-printing studio, room S2” is recognisable outside the drawing too. “Area 14” may be a convenient working name in graphics software, but should not remain the only label in the publication.
One place can have several representations: a list row, a room outline and a details panel. They should use the same data relationship. Renaming it in one view must not leave the old name in the others. Mark in the design which information belongs to the place and which describes only how it is displayed.
The room and the workshop held there are separate pieces of information. S2 may host screen printing in the morning and bookbinding in the afternoon. Selecting the programme for a particular time should change the activity description while retaining the room's identity. If the activity moves to S4, the new location needs to be stated explicitly. Changing the colour of S2's outline will not explain to a returning visitor what happened to their selected workshop. Including the event name in the panel also helps them recognise which part of their selection was retained.
“Available” also needs explanation. It could mean places remain in a workshop, the room is open at a certain time or particular conditions for using the space. Instead of a shared green dot, show the relevant information: “6 places left in the 14:00 workshop” or “room opens at 13:45”. Do not use the same status for the physical characteristics of an entrance and the number of registered participants. These are different data, updated for different reasons.
The distinction between a place and its image is visible when zooming. The selected room remains S2 even when its outline occupies half the screen. Do not determine the selection from whichever element happens to lie under a stationary cursor after the plan moves. Zoom changes the view, not the visitor's intention.
MDN describes viewBox as the position and dimensions of an area in SVG coordinates mapped to the element's visible viewport. It is a graphics presentation mechanism. It does not itself maintain the relationship between a room's name, highlight and description. That behaviour must be specified in the design and implemented correctly.
On a plan with several floors, the full name should include the level. Room S2 on the ground floor and S2 upstairs must not have indistinguishable search results. After changing floors, show whether the previous selection remains active outside the current plan or has been cleared. A silent jump to a different S2 is especially harmful because it looks like correct operation.
Also distinguish a room's area from its entrance. An outline shows the space occupied but may not indicate the right door. In our example, “entrance from the corridor with reception” is more useful than a pin in the middle of a workshop table. If the publication includes information about entrance accessibility, it must come from confirmed organiser data. The drawing alone cannot establish it.
A map and list of service locations (in Polish) helps someone choose the right address. An indoor plan begins where the address no longer suffices. Do not copy a branch card unchanged. A visitor needs to distinguish the building, level and specific place even when the whole property has one street number.
A choice in the list should lead to the same place
The list should not be a modest afterthought beneath an attractive graphic. Someone who knows a workshop's name may start there. A row should identify the room and open the same details as the area on the plan. A longer list may benefit from groups by floor or name search, but four rooms do not require an extensive catalogue.
WAI's image map tutorial calls for text context for the whole map and descriptions of each area's destination or action. It also suggests text links as a safeguard when such maps have scaling problems on mobile devices. The advice concerns the image-map technique described; it does not replace acceptance of every custom interactive plan.
Selecting “S2 - screen printing” in the list should highlight S2 on the drawing. If the room is outside the frame, offer “Show on plan” or clearly reposition the view. Automatic zoom should not hide the name the person just selected. The relationship must be visible, not merely stored in internal application state.
The same principle works in reverse. Clicking an area can open a panel with its name and short description. On returning to the list, the corresponding row should still be recognisable as selected. Do not confuse this with pointer hover or focus, the current place of keyboard interaction. A user may move focus to the close button while still viewing S2's details.

After closing the panel, return interaction to a predictable place. When opened from the list, that will usually be the selected row; when opened from the plan, its corresponding area. If a floor or filter changed and the original element is no longer present, provide another recognisable return point. Do not move someone to the top of a long page without explanation. Also specify what happens while details are loading: their heading should identify the selected room, and the previous description must not appear to be the content of the new selection.
A similar relationship between a point, series and description appears in an interactive chart (in Polish). A plan adds spatial meaning. Highlighting one room should not look like highlighting an entire wing. If the clickable area is intentionally larger than a small symbol, test behaviour near neighbouring areas so an easier target does not change the selection.
In Aeneia Design's interface work, these transitions can be mapped before the final graphic is made. The material for discussion is several real places and their names, not only a decorative floor plan. At this stage it is easier to see that two rooms need distinguishing than after their outline animations have been polished.
Zoom, rotation and a small screen
Visible zoom-in and zoom-out buttons change the frame without requiring someone to guess a gesture. The explanation of WCAG 2.5.1 gives plus and minus buttons as an alternative to a pinch gesture on a map. It notes that keyboard operation alone is not sufficient for that criterion. The explanation concerns alternatives to gestures, not a declaration that the whole plan is accessible.
If the plan can rotate, there must also be a recognisable way to return to its original orientation. North is not always the most useful reference inside a building. At the entrance, guests may use reception and the main corridor as reference points. Choose a reference that matches the drawing and on-site signs; do not add a compass merely for appearance.
A view reset should have a known scope. “Show the whole plan” may retain the selected room and zoom the frame out. “Clear selection” removes the highlight. Combining both effects in one unexplained symbol makes calm exploration harder. A similar separation of frame and selection helps in operating a 3D model (in Polish), although an indoor plan does not require the same number of movements.
During an active search, establish what “Show the whole plan” means. Does it restore only the full frame, or also every previously hidden place? It is sensible to separate those actions when they serve different tasks. Someone searching for screen printing may want to see it in relation to the whole building while keeping the chosen workshop highlighted. Removing the query together with the frame change forces them to type the name again. Record this case in the control's behaviour instead of leaving it to chance during implementation.
On a phone, the details panel may occupy much of the screen. Before opening it, decide where the place name remains and how to return to the drawing. If the plan jumps to the beginning when the panel closes, the user has to find the room again. Retaining position when returning to a list (in Polish) has an equivalent here in retaining the frame, floor and selection.
Do not block scrolling of the entire page merely because a finger lands on the plan. There needs to be a clear boundary between exploring the graphic and moving to later content. A large plan occupying almost the whole screen, from which it is difficult to leave with a simple movement, is particularly troublesome. Choose the solution during acceptance of the actual interaction on a device, not from a still screenshot.
Text on the plan must retain its relationship to the area after zooming. With dense names, abbreviations and a readable list can help, but the abbreviation should also appear on the place card. A legend saying “green means workshops” alone does not identify S2. Colour describes a group; the name resolves the specific destination.
Aeneia Design Let us connect a drawing of the space with a list of places, entrance information and predictable selection on a phone. Bring the plan and the names visitors use so the interaction design can be based on them. Discuss a spatial plan and list of places
A trial with a name the designer does not prompt
Prepare several acceptance tasks with different starting points. One person knows the workshop name. Another recognises a room on the drawing but wants its description. A third returns after checking details and looks for a neighbouring station. Record the actual course of these trials rather than treating a working first click as acceptance of the whole plan.
In our fictional building, include two similarly named rooms, a room outside the initial frame and a place temporarily excluded from the programme. Exclusion should not look like a loading error. If a workshop moved, the previous area and list should show the same change. The person updating content needs to know where to make the correction.
Also go through the whole path with a keyboard and an enlarged page, using the principles of functional accessibility acceptance (in Polish). A list's existence alone does not prove that someone can open details from it and return to the selected row. Check this in the working solution.
If the drawing does not load, place names and descriptions should still let people perform the agreed task. If the current programme cannot be retrieved, show a separate state. An empty list should not imply that the building has no rooms. The content owner must also be able to identify which version of the drawing was published.
After replacing the drawing, check at least known places at the edges and in the middle of the plan. New file margins can cause old selectable areas to stop matching rooms even when the graphic looks correct. Acceptance of the update should cover names, highlights and details for the same places. A short instruction for this check helps the programme owner. When a new drawing is published, that person should immediately receive a reminder to check the linked areas. The graphic file's validity alone does not complete the update.
The final criterion can be concrete: a visitor selects S2 from the list, sees the corresponding area, reads the correct entrance and remains oriented after closing the details. If she can do that without further explanation from the designer, the plan supports the visit. The rotating graphic can then remain a pleasant extra.








