Skip to content
Interface language: English
Oriens / Signal

Process heat in Korea: not every heat pump answers the same enquiry

Research Korean process-heat opportunities by separating heat source, use and the supplier role.

Article language: English

A woman in a red dress and light outer garment stands beside a stone-edged pool in a high-ceilinged hall.
In this article

Search results include domestic heat pumps, a system for a paper mill and a research platform comparing ways to supply heat. All originate in Korea. They are not three interchangeable offers or one list of buyers for a Polish component. Before looking for manufacturers, name the work for which heat is needed.

In a release published on 29 October 2026, Korea's Ministry of Climate, Energy and Environment distinguishes pumps for heating and cooling buildings from industrial applications. It describes process heat through work involved in making products, including drying and processing. A heat pump takes heat from a lower-temperature source and delivers it at a higher temperature using drive energy. This basic distinction comes from the official ministry material.

A Polish supplier of heat exchangers or research services therefore needs more than the category “heat pump”. It may seek a device manufacturer, a team developing an industrial system or a company wishing to describe its own heat needs. Each relationship has a different subject. Technical answers require specialists; market research should lead to the right question and the right party.

Where should heat go, and where could it come from?

Consider a hypothetical Polish maker of heat exchangers, components that transfer heat between separate circuits. It wants to investigate Korean industrial projects. It does not offer a complete factory modernisation. It has a defined product group and needs to establish whether a potential relationship concerns a manufacturer's device or a solution for a particular site.

The company begins with two questions: where would the system obtain heat, and for what activity would it supply it? Here waste heat means energy from existing work that may be considered as a source for another use. Its mere presence does not establish suitability. It does distinguish a project using a specified stream from one still looking for an available source.

In a 22 July 2026 release from the National Research Council of Science and Technology (NST), KIMM, the Korea Institute of Machinery and Materials, presents the iTOP platform. According to the description, it compares heat-supply methods considering location, process demand, waste-heat availability and changes in heat demand over time, among other factors. The research institution's release thus identifies site-specific data from which analysis begins.

For the Polish company, this suggests what separates two cases hidden by the same word. A recipient may need heat at different times from those when the proposed source is available. It may still be investigating an existing circuit. The first task would then be gathering data, not sending a component catalogue with the most popular model marked.

The supplier need not decide itself whether source and use can be connected. It can record who has the data and who should assess it. “The plant has waste heat” is a starting point for a question about a specific process, not yet evidence that the supplier's product will form part of a future installation. Preserve that distinction in the meeting note before it becomes a colourful sales opportunity.

The company now receives two descriptions. Plant A identifies a process from which it wants to consider recovering heat, but has not supplied information about its availability during the day. Plant B describes an activity requiring heat and seeks someone to help identify a possible source. Both messages mention heat pumps, but each lacks a different side of the question.

The Polish supplier asks A to identify the team familiar with the process and intended heat use. It asks B who is responsible for gathering data to investigate the source. These are still questions about preparing cooperation. It does not send both plants an identical catalogue as an answer to an undefined application or choose a component on the designer's behalf.

Initial answers will show whether there is material for a conversation about the product at all. A may identify a system-development partner; B may still be organising preliminary research. Each outcome leads to a specific next contact. Instead of two entries marked “interested in buying”, the sales team has two distinct cases it will not confuse at the next meeting.

A paper mill is a specific reference, not the whole market

In its Korean release of 8 July 2026, LG describes supplying an industrial heat-pump system to Ajin P&P's plant in Daegu and its start of operation in early July. The material connects the application with paper production and a research and development project carried out since 2023 by fifteen organisations, including LG. These are the roles and implementation stage stated in LG's own project description.

Reading that reference, a Polish company can identify the final plant's role and the system supplier's role. That opens two directions for further investigation. In one it asks the solution manufacturer about cooperation on a component. In the other it investigates who prepares a change in the plant's heat supply. Contact with the final user does not automatically mean a discussion about directly buying a heat exchanger.

The Korean smart-factory ecosystem (in Polish) similarly separates user from technology supplier. Here the role in relation to a specific heat circuit also matters. One company may be responsible for production and a separate partner for system design. The general title “energy person” does not yet explain who assesses a component or can permit a further conversation about data.

Preserve the time scope of each reference. The July description's start of operation is an event in that project; a development announcement concerns a later stage. Do not turn one fact into a list of factories “currently replacing boilers”. An industry calendar does not update itself when the latest date is pasted into a presentation.

Aeneia conceptual photography

The Polish company's map may include the paper-mill reference and a question about components used by the system supplier. It should leave open whether the sought work is currently bought externally and how it is assessed. A known project is a better reference point than a general category, but the proposed contribution still needs definition.

Catalogue product, demonstration and research direction

In its industrial-technology overview, Korean agency KEIT identifies high-temperature heat pumps replacing boilers. It names steam production, drying and heating as areas of work and points to process-related technology needs. KEIT's research-direction description separates these tasks from typical hot-water supply and space heating in buildings.

Market research should therefore identify what kind of material entered the comparison. A product sheet defines one product's offer. A demonstration announcement describes a specified system tested at a specified site. A research document identifies a field of developing capability. All may be valuable, but each answers a different question for the Polish supplier.

The same July KIMM release also describes SoHProtes, a system combining solar energy with a heat pump. According to the institution, it was installed at a food-processing plant in Gimpo and demonstrated under industrial conditions. Keep the demonstration description together with the site and subject of the trial.

Do not present the acronym SoHProtes as a product available in any configuration. A Polish manufacturer may use the material as a route to a research team developing a particular application. Its first conversation can ask about the current project stage and possible cooperation. Investigating a component may require different preparation from enquiring about supply to a serially produced device.

A water-technology trial at an operating facility (in Polish) provides a useful comparison. The technical subject differs, but the evidence remains tied to the place and task tested. The heat-exchanger supplier must establish whether a partner seeks a component for further research, is developing its own project or already makes repeat deliveries.

The ministry's 29 October announcement is not a purchase notice

The ministry's 29 October release announced a meeting of industry and research institutions on developing and using industrial heat pumps. It also describes research and demonstrations concerning process heat. The release and attached programme show the discussion topic and participants' stated roles; they do not establish an application call for any foreign supplier.

For market research, this update has a practical use. It adds institutions and companies whose scope merits closer checking. It does not confirm that every named organisation orders components, offers a cooperation programme or accepts applications on identical terms. Find that information in the relevant organisation's own material.

A Polish company wishing to ask about participation should first name its contribution. Does it want to supply a repeatable product, develop a particular component or offer research capability? Each sentence leads to a different conversation. Placing all three at the end of a general email leaves the recipient more work than information.

Such local research can be a starting point for work with Aeneia Oriens. Discuss a scope covering organisations' activities, current materials and possible contacts for a specific use. The company receives information for its own decision, while its technical team gets named questions requiring data. A well-identified gap can be more useful than another confident answer derived from an article title.

An application sheet should leave room for an answer

Before first contact, prepare a short description of the task addressed by the offer. In our example the company identifies its heat-exchanger group, the known range of past applications and a question about the component's role in the developing system. A technically responsible person confirms parameters. Sales material should not select equipment from an installation photograph. If it includes a route to checking compatibility with the recipient's device (in Polish), that route should lead to confirmed data and appropriate assessment. Naming the paper industry alone does not confirm a component fits every system in a mill.

Separately record what you need from the contact. It may be confirmation of who assesses components or whether the project concerns research or a repeatable product. More detailed information exchange follows only after the right relationship is established. An RFQ to a supplier in Asia (in Polish) can help if a ready-made list of fields does not replace investigation of the subject.

When describing heat source and use, distinguish information received from a partner from your own assumption. If a plant only says it uses heat for drying, do not add the type or continuity of an available stream. Retain the question for the appropriate person. A missing answer is a concrete research result defining the next step.

Then read your material as a system supplier would. Is the Polish company's real contribution visible? Are already confirmed data clear? Can the recipient identify a question it can answer without preparing the entire project? If the offer speaks only about saving energy in Korea, it remains too broad for a component-specific conversation.

In the Chinese photovoltaic value chain (in Polish), the production stage helps distinguish potential recipients. For process heat, the relationship between source, use location and operating time is also needed. The shared language of energy transition is background. The first decision rests on a narrower basis: which task fits your scope and who can assess that hypothesis substantively.

Aeneia / Aeneia editorial

Editorial article. Source links are included in the text.

About Aeneia

Brands we have worked with

  • L’Oréal
  • Garnier
  • Netflix
  • Carrefour
  • Warner Bros. Discovery
  • Biedronka
  • HBO Max
  • Wolt
  • Żabka
  • COSRX
  • Embassy of China in Poland
  • Mixa
Aeneia / Initium

From knowledge to a decision

Tell us what you want to put in order. We will agree on where to start.

Contact Aeneia

We partner with and use solutions from:

  • Google
  • OpenAI
  • Microsoft
  • Stripe
  • Anthropic
  • Linear